Fostex PD-6 - Manual (Page 121)

119
PD-6 DVD Location Recorder (Chapter 8: Utility mode)
Selecting the record protection on or off [Rec protect]
Using the “Rec protect” menu, you can select “On” or “Off” of the recording
protection (record prohibit) for the currently loaded audio file.
1. Select the “Rec protect: ***” menu and press the [ENTER] key.
The current option (“On” or “Off”) flashes (the default is “Off”).
<Note>
If you enter the Utility mode when no file is available on the current disk,
“Rec protec—” is shown instead of “Rec protect: Off (or On)”. This means
there is no audio file to which the “Rec protection” setting is applied. If you
select it and press the [ENTER] key in this case, “Void!” is shown.
2. Use the [SEL] dial to select “On” or “Off”, and press the [ENTER] key to confirm
the setting.
3. Press the [EXIT] key to exit the Utility mode.
<Note>
On the Normal screen, a record protected audio file has the “key” icon
beside the file name, as show below.
flashing