Fisher-Price OCEAN WONDERSTM AQUARIUM CRADLE SWING 79667 - Manual (Page 7)

Assembly
7
Motorized
Frame Tube
Hole
• Press the button on the seat tube and slide the seat tube
into the motorized frame tube. Make sure the button on
the seat tube “snaps” into the larger hole in the motorized
frame tube.
Press
Seat Tube
Button
• Fit an M5 lock nut into the recess in the seat tube.
Make sure the rounded side of the lock nut faces out.
• Insert an M5 x 30 mm screw into the opposite side of the
seat tube.
Tighten the screw with a Phillips screwdriver.
Do not over-tighten.
13
M5 Lock Nut
Rounded
Side
M5 x 30 mm Bolt
BOTH SHOWN ACTUAL SIZE
14
15
• Fit the string (below the knot) of a toy
through the slot in a clip on the mobile.
• Pull down on the toy to be sure it is secure on the mobile.
• Repeat this procedure to assemble the other three toys to
the mobile.
Clip
Slot
Clip
Mobile
Toy
16
M5 x 30 mm Screw
BOTH SHOWN ACTUAL SIZE
Rounded
Side
• Fit an M5 lock nut
into the recess in the
motorized frame tube.
Make sure the rounded
side of the lock nut faces out.
• Insert an M5 x 30 mm screw into the smaller hole in the
motorized frame tube.
• Tighten the screw with a Phillips screwdriver.
Do not over-tighten.
M5 Lock Nut