FUJITSU V700 - Manual (Page 99)

94 - Troubleshooting
Modem Result Codes
The operating system and application software that is factory installed detects the modem
characteristics and provides the necessary command strings to operate the modem. The internal modem
operation is controlled by generic AT commands from the operating system and application software.
The standard long form result codes may, in some cases, be displayed on your screen to keep you
informed of the actions of your modem. The operating system and application software may suppress
display of the result codes.
Examples of result codes are:
• OK
• NO CARRIER
• NO DIALTONE
• CONNECT 53000 (Connection complete at 53,000 bps.)
• ERROR
• FAX
• RING (This means an incoming call.)
• BUSY
• NO ANSWER
When using the internal modem with applications that are not factory installed refer to the application
documentation.