Fisher & Paykel OR90 - Manual (Page 9)

7
Installation instructions
max 290 mm
Levelling the cooker
Level the cooker by screwing the feet in or out,
as shown in Fig.5.
Fitting the adjustable feet
Important!
Using the supplied adjustable feet is MANDATORY. For safety reasons and to ensure adequate
ventilation, the cooker chassis MUST NOT sit directly on the floor, a plinth, or other support surface.
Fit the adjustable feet before using the cooker.
1 Rest the rear of the cooker on a piece of the polystyrene packaging, exposing the base for
fitting the feet.
2 Fit the four feet by screwing them tight into the support base as shown.
Fig. 3 Location of feet Fig. 4 Top of feet to be screwed in tightly
Fig. 5 Levelling the cooker
Locating the area for gas and electrical connection
Dotted line showing the
position of the cooker
when installed
Area for gas and
electrical connections
Fig. 2 Area for gas and electrical connections