Furuno NAVNET 1833 - Manual (Page 178)

5. CUSTOMIZING YOUR UNIT
5-8
5.3 Plotter Setup
This paragraph provides the information necessary for setting up the plotter
display.
5.3.1 Navigation options
Navigation options, for example, waypoint switching method, may be set on the
PLOTTER SETUP menu.
1. Show the plotter display, then press the [MENU] key open the main menu.
2. Press the PLOTTER SETUP soft key.
WAYPOINT SWITCHING
ARRVL ALM CRCL
COURSE VECTOR
LINE
SET GOTO METHOD
1POINT
PLOTTER
SETUP
EDIT
RETURN
D. BOX
Plotter setup menu
Contents of plotter setup menu
Item Description Settings Default Setting
Waypoint
Switching Chooses waypoint switching method.
See “Switching waypoints” on page
3-50. Perpendicular,
Arrvl Alm Crcl,
Manual Arrvl Alm Crcl
Course Vector You may extend a line from the own
ship position to show ship’s course. It
may be a vector (length depends on
ship’s speed) or a simple line (course
bar).
Line, Vector, Off Line
Set GOTO
Method Sets the method by which to navigate
to a quick point. See paragraph
“3.10.1 Navigating to a quick point.” 1 Point, 35 Points,
35Pts/Port SVC 1 Point
D. BOX
(soft key) Sets up data boxes. See “paragraph 5.5.”