Drivers – FUJITSU Mainboard D1562 User Manual
Page 37
Drivers
A26361-D1562-Z120-2-6319
English - 27
Microcode update under DOS with bootable microcode update floppy disk - brief description
Ê
Download the update file from out website to your PC.
Ê
Insert an empty floppy disk (1.44 MB).
Ê
Run the update file under DOS (e.g.
1495101.EXE
).
Ê
A bootable update floppy disk is created. Leave the floppy disk in the drive.
Ê
Restart the PC.
Ê
Follow the instructions on screen.
To determine whether the latest microcode update has been loaded, the so-called Patch-ID of the
processor can be read out.
Ê
Press the
[F1]
key in the
BIOS Setup
.
The entry
CPU / Patch ID
is shown on the displayed information page.
A list with the current processors and the related Patch-IDs is available on the Internet.
i
If the processor is not recognised, you also require the microcode update tool for
processors of the P6 family.
Drivers
Only when no drivers are installed on your system, or you want to update these, proceed as follows:
Ê
Insert the CD "Drivers & Utilities Collection" into the CD-ROM drive.
Ê
If the CD does not start automatically, run the
START.EXE
programme in the main directory of
the CD.
Ê
Select
DeskUpdate - Fully automatic installation
.
Ê
Follow the screen instructions.