Franklin SCQ-200 - Manual (Page 5)

4
Getting Started
This product uses four LR03 batteries (AAA batter-
ies). The batteries should be changed when the
screen contrast is too light even after adjustment.
Warning! If the batteries completely lose power,
all the information stored in the phone list will be
permanently lost. Furthermore, any time that you
change the batteries, you risk losing all your
phone list information, so always keep
written
copies of your phone list information.
1. Remove the battery compartment cover on
the back of the unit.
2. Install four LR03 batteries.
3. Press
ON/OFF
.
A brief demonstration appears.
4. Press
CLEAR
to stop the demonstration.
5. Press or repeatedly to adjust the
screen contrast.
Note: You can adjust the screen contrast only
when
ENTER a word is in view.
✓ To Disable the Demo
You probably do not want to view the dem-
onstration every time you use this product.
To disable the demonstration, first press
SPELL
, type ✽✽ d and then press
ENTER
. To
enable it again, do the same.