Furuno GP-3500F - Manual (Page 115)

9-1
9. CUSTOMIZING YOUR UNIT
This chapter describes the various options which allow you to set up your unit to
suit your needs.
9.1 CHART SETUP Menu
The CHART SETUP menu provides for chart offset, track controls and chart
details.
9.1.1 Offsetting the chart
In some instances position may be off by a few minutes. For example, the
position of the ship is shown to be at sea while it is in fact moored at a pier. You
can compensate for the error by offsetting chart position as follows:
1. Press the [MENU] key to show the main menu.
2. Press the [7] key to show the CHART SETUP menu.
If the CHART SETUP menu does not appear, rotate the [ENTER] knob clockwise
to show it.
7. CHART SETUP
GOTO CONTOUR LINES SETUP
OFFSET CHART POSITION 1. YES 2. NO
LAT/LON GRID 0. OFF
TEXT INFORMATION 1. YES 2. NO
WAYPOINTS 1. LARGE 2. SMALL 3. OFF
WAYPOINT NAME 1. YES 2. NO
CHART BORDER LINES 1. YES 2. NO
LANDMASS 0. OFF
TRIMMING BORDER LINE 0. OFF
BACKGROUND 0. OFF
TURN KNOB TO SELECT MENU.
SELECT THE ITEM OF EACH MENU BY TRACKBALL.
Chart setup menu
3. Rotate the [ENTER] knob to select OFFSET CHART POSITION.