Important safety instructions – Firesense BLT-999W-1 User Manual

Page 4

Advertising
background image

4

IMPORTANT SAFETY INSTRUCTIONS

Prior to plugging your heater into an electrical outlet,
verify that the house circuit breakers for the outlet are
on.

The heater may emit a slight, harmless odor when first
used. This odor is normal and it is caused by the initial
heating of internal heater elements and will not occur
again.

If your heater does not emit heat, consult the operation
section of this manual for further information.

Use with a CSA or UL certified surge protector.

CAUTION: High temperature, risk of fire.
Keep electrical cords, drapery,
furnishings, and other combustibles at
least 3 feet (0.9m) from the front of the
heater and away from the side and rear.

WARNING: Servicing should be done only
while the heater is disconnected from the
power supply circuit.

1/

2/

3/

!

!

SA1965

SA1965

CAUTION:

RISK OF ELECTRIC SHOCK

DO NOT OPEN

NO USER-SERVICEABLE P ARTS INSIDE

HIGH TEMPERA TURE

4/

!

KEEP ELECTRICAL CORDS, DRAPERY AND OTHER FURNISHINGS AT
LEAST 3 FEET (0.9m) FROM THE FRONT AND SIDES OF THE HEATER.

Advertising