Fisher-Price H5985 - Manual (Page 3)

1
Assembly
IMPORTANT! Before assembly or each use, inspect this product
for damaged hardware, loose joints, missing parts or sharp edges.
DO NOT use if any parts are missing, damaged or broken. Contact
Mattel for replacement parts and instructions if needed. Never
substitute parts.
Side Rails
Cross Brace (Push)
Button
• Position each side rail so that the button faces outward.
• Fit the cross brace between the side rails, as shown.
• Push the cross brace down to "snap" it into place. This may
require a lot of force.
2
#8 x 1.9 cm Screw
Cross Brace
Side Rails
• Insert a #8 x 1.9 cm screw through the hole in the bottom of
each side rail and into the cross brace. Tighten the screws with
a Phillips screwdriver. Do not over-tighten.
3
Press Tabs
Seat Back Tube
Side Rail Sockets
• Insert the seat back tube into the socket in each side rail.
• While pressing the tabs on the ends of the seat back tube,
continue to insert the seat back tube into the sockets in each
side rail, until the tabs "snap" into place. Make sure you hear
a "snap" on each side.
• Pull the seat back tube up to be sure it is secure in the side
rail sockets.
4
Side Rail Hole
Front Tube
Vibrations Unit
Side Rail Hole
• Locate the hole in each side rail.
• With the vibrations unit facing forward, fit the front tube
to the side rails, as shown. Hold the front tube in place and
proceed to step 5.
3 3