Fusion Emperor L702B Pro - Manual (Page 14)

13
In this example a ‘Normal’ charge is selected and then the ‘Enter’ button is pressed
for 2 seconds to start the charge.
As shown in the flow chart, pressing the ‘Mode’ or ‘Esc’ buttons at any stage moves
through the different screens giving detailed information about the charge.
Pressing the ‘Esc’ button for 2 seconds at any stage will stop the charge.
OTHER SCREENS
As shown in the flowchart below, the other screens are accessed using the ‘Mode’
and ‘Esc’ buttons.
 11]LiPo 3S 2200mAh
CHG. : 2.1A 4.20V/C
DCHG. :10.0A 3.0V/C
STORE MODE START
 0]NiMH 6S 3300mAh
CHG. : 3.3A 5mV/C
DCHG. : 5.0A 0.8V/C
CYCLE : C
 D 1X 10m
 TEMP.MODE : °C
BUTTON SOUND : ON
FINISH SOUND : 5sec
MELODY : 1
 0]NiMH 6S 3300mAh
CHG. : 3.3A 5mV/C
DCHG. : 5.0A 0.8V/C
CYCLE : C
 D 1X 10m
 INPUT VOLT: 13.200V
OUTPUT VOLT: 11.123V
BAT. TEMP. : No.Sens
PEAK TEMP. : 0.0°C
 0]NiMH 6S 3300mAh
CHG. : 3.3A 5mV/C
DCHG. : 5.0A 0.8V/C
CYCLE : C
 D 1X 10m
[ 1]CAPACITY VOLTAGE
C: 0mAh 0.000V
D: 0mAh 0.000V
1
 0]NiMH 6S 3300mAh
CHG. : 3.3A 5mV/C
DCHG. : 5.0A 0.8V/C
CYCLE : C
 D 1X 10m
Mode
ESC
Mode
ESC
Mode
ESC
Memory Screen User Settings Data View Cycle View
3S=11.845V 1S=3.944V
33.95V
13.94V
8mV
3
1
 0]NiMH 6S 3300mAh
CHG. : 3.3A 5mV/C
DCHG. : 5.0A 0.8V/C
CYCLE : C
 D 1X 10m
Mode
ESC
Balancer View
1
USER SETTINGS SCREEN
This screen is used to set the temerature mode and
charger sounds for each charger channel. We
recommend selecting a different melody for each
channel (charger), so you can easily identify which
channel has completed it’s operation.
DATA VIEW SCREEN
The data view screen shows both the input and output
voltages, together with the current and peak
temperature readings for each channel.
CYCLE VIEW
The cycle view screen shows the charge and discharge
data for the most recent pack to be charged or
discharged.

TEMP.MODE : °C
BUTTON SOUND : ON
FINISH SOUND : 5sec
MELODY : 1

0]NiMH 6S 3300mAh
CHG. : 3.3A 5mV/C
DCHG. : 5.0A 0.8V/C
CYCLE : C

D 1X 10m

INPUT VOLT: 13.200V
OUTPUT VOLT: 11.123V
BAT. TEMP. : No.Sens
PEAK TEMP. : 0.0°C

0]NiMH 6S 3300mAh
CHG. : 3.3A 5mV/C
DCHG. : 5.0A 0.8V/C
CYCLE : C

D 1X 10m
[ 1]CAPACITY VOLTAGE
C: 0mAh 0.000V
D: 0mAh 0.000V
1

0]NiMH 6S 3300mAh
CHG. : 3.3A 5mV/C
DCHG. : 5.0A 0.8V/C
CYCLE : C

D 1X 10m