Fusion Emperor L702B Pro - Manual (Page 16)

15
ERROR MESSAGES
The Emperor L702B Pro has a number of error and warning messages that are
designed to advise the user of any problems.
When applicable, pressing the ‘Esc’ button clears the message.
SAFETY PRECAUTIONS
• DO NOT attempt to charge incompatible types of rechargeable batteries. This
charger is designed to only charge and discharge Nickel-Cadmium, Nickel-Metal
Hydride, Lithium-Ion, Lithium-Polymer, LiFePO4 and Lead-Acid batteries.
• Make sure you place the charger on a firm level surface for charging.
• DO NOT attempt to charge batteries at excessive fast charge currents. Check with
your battery manufacturer for the maximum charge rate applicable to your battery.
• DO NOT use automotive type battery chargers to power the charger.
• DO NOT leave the charger unattended while charging. Disconnect the battery and
remove input power from charger immediately if the charger becomes hot. Allow the
charger or battery to cool down before reconnecting.
• DO NOT allow water, moisture or foreign objects into the charger.
• DO NOT place the battery or charger on or near a flammable object while in use.
Keep away from carpets, cluttered workbenches, etc.
• DO NOT cover the air intake holes on the charger as this could cause the charger to
overheat.
• Connect the charge lead to the charger BEFORE connecting to the battery.
• DO NOT disassemble the charger.
• This unit is not intended for use by young children or infirm persons unless they
have been adequately supervised by a responsible person to ensure that they can
use it safely.
• Young children should be supervised to ensure that they do not play with the
charger.
• DO NOT attempt to charge non-rechargeable batteries.