Fisher-Price L7836 - Manual (Page 4)

4
1
Hint: There are numbered labels on each leg and in each corner of
the base. You will match the number on each leg to the number in
each corner on the base.
• Carefully place the base on it's side.
• Match the number label on a leg with the number label on a
corner of the base. Fit the leg to the peg on the base.
• Insert two M6 x 40 mm screws into the leg and tighten with the
Allen wrench.
• Repeat this procedure to assemble a leg with a wheel to the
other corner of the base.
Assembly
IMPORTANT! Before assembly and each use, inspect this product
for damaged hardware, loose joints, torn fabrics, missing parts
or sharp edges. DO NOT use if any parts are missing or broken.
Contact Fisher-Price ® for replacement parts and instructions if
needed. Never substitute parts.
Leg with Wheel
Base
Peg
• Carefully turn the base assembly over.
• Match the number label on a leg with the number label on a
corner of the base. Fit the leg to the peg on the base.
• Insert two M6 x 40 mm screws into the leg and tighten with the
Allen wrench.
• Repeat this procedure to assemble the remaining leg with a
wheel to the other corner of the base.

Leg Leg with Wheel
Peg
Leg
CAUTION
This package contains small parts in
its unassembled state. Adult assembly
is required.
Peg
Peg
• Turn the assembly upright.
• Position a brace so that it curves away from you.
• Fit the brace to the bottom of two legs, as shown.
• First line up the holes in the brace with the holes in the legs.
Then, insert two M6 x 40 mm screws into each leg. Tighten the
screws with the Allen wrench.
• Repeat this procedure to attach the other brace to the
base assembly.
3
Brace