FRIGIDAIRE 242046800 - Manual (Page 18)

18
CAUTION
To avoid injury from breakage, handle tempered glass
shelves carefully.
STOrAGE FEATUrES
 NOTE
Features may vary according to model.
Your refrigerator includes SpillSafe TM glass shelves that
are designed to catch and hold accidental spills.
You can easily adjust shelf positions in the fresh food
compartments to suit your needs. The shelves have
mounting brackets that attach to slotted supports at the
rear of each compartment.
To change the position of a shelf:
1 Before adjusting a shelf, remove all food.
2 Lift the front edge up and pull the shelf out.
3 Replace by inserting the mounting bracket hooks
into the desired support slots.
4 Lower the shelf and lock into position.
Shelf features
Crispers
Crisper drawers are designed for storing fruits,
vegetables, and other fresh produce.
Full SpillSafe TM Shelf
Half SpillSafe TM Shelf
Opening Crisper Drawer
Adjusting Crisper Humidity
Drawers
Your refrigerator includes a variety of storage drawers.
These drawers are located in fixed positions at the
bottom of the fresh food compartment.
Crisper humidity control
Crisper drawers include a sliding control for adjusting the
humidity inside the crisper. Leafy vegetables keep best
when stored with the Humidity Control set on Higher
Humidity. Fresh fruits keep best when stored with the
Humidity Control set on Lower Humidity.
removing Crisper Drawer
To remove the Crisper Drawer for cleaning:
1 Pull the drawer out until it stops.
2 Lift the front slightly and remove the drawer.