Fisher 1077 - Manual

www.Fisher.com
D101296X012
Type 1077 Manual Handwheel Actuator
Introduction 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Scope of Manual 1 . . . . . . . . . . . . . . . . . . . . . . . . .
Description 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Specifications 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adjustment 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operation 7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Maintenance 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Lubrication 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Disassembly 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Assembly 9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Parts Ordering 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Parts Reference 10 . . . . . . . . . . . . . . . . . . . . . . . . . . .
Introduction
Scope of Manual
This instruction manual includes installation,
adjustment, operation, and maintenance information
for the Type 1077 manual handwheel actuator.
Instructions for the control valve is included in a
separate manual.
Do not install, operate or maintain a Type 1077
actuator without first
D being fully trained and
qualified in valve, actuator and accessory
installation, operation and maintenance, and
D
carefully reading and understanding the contents of
this manual. If you have any questions concerning
these instructions, contact your Emerson Process
Management
t sales office before proceeding.
Note
Neither Emerson, Emerson Process
Management, nor any of their affiliated
entities assumes responsibility for the
selection, use and maintenance of any
product. Responsibility for the
selection, use, and maintenance of any
product remains with the purchaser
and end-user.
Figure 1. Type 1077 Handwheel Actuator Mounted on a
Design V150 Valve
W8176-1 / IL
Description
The Type 1077 manual-only handwheel actuator
(figure 1) is used with rotary-shaft valves such as the
9500 butterfly valve, Type 8532 and 8560 eccentric
disc valves, Design V150, V200 and V300 Vee-Ball
R
valves, Design V250 valves, and Design CV500 and
V500 eccentric plug valves. In the Type 1077
actuator, torque is transmitted from the handwheel
through the handwheel input shaft to a worm and
drive sleeve gear (sector) with splined bore. The
worm and drive sleeve gear multiply the torque and
transmit it to a splined valve shaft or splined stub
shaft. The size 10-KE:6 actuator additionally has a
spur gear reduction drive for increased torque
capability.
Specifications
Type 1077 actuator specifications are given in
table 1. Some specifications for a given actuator as it
comes from the factory are stamped on a metal
nameplate attached to the actuator mounting yoke
(key 7, figure 6).
Instruction Manual
Form 5605
March 2007
1077 Actuator