Kenwood FP905 User Manual
Page 7
to use your liquidiser (FP910)
1 Fit the sealing ring
ተ into the blade unit
ቱ - ensuring the seal is located correctly.
Leaking will occur if the seal is
damaged or not fitted correctly.
2 Screw the jug onto the blade unit.
3 Put your ingredients into the jug.
4 Put the filler cap in the lid, then turn.
5 Turn the lid in a clockwise direction to
lock onto the jug.
6 Place the liquidiser onto the power unit
and turn to lock
ᕤ.
7 Select a speed or use the pulse control.
to use your liquidiser
(FP920)
1 Fit the sealing ring
ተ into the blade unit
ቱ - ensuring the seal is located correctly.
Leaking will occur if the seal is
damaged or not fitted correctly.
2 Screw the jug onto the blade unit.
3 Put your ingredients into the jug.
4 Push the lid seal onto the underside of
the lid.
5 Fit and lock the filler cap in the lid, by
turning one position
.
6 Fit the lid to the goblet and turn
the filler cap to
to lock.
The filler cap can be located in 3 different
positions (see
A
)
- filler cap removable for adding
ingredients to the jug.
- lid unlocked/filler cap locked to
the lid for fitting
and removing the lid.
- lid locked.
7 Place the liquidiser onto the power unit
and turn to lock
ᕤ.
8 Select a speed or use the pulse control.
●
CAUTION: Blending very hot liquids may result in hot
liquid and steam being forced suddenly past the lid
or filler cap. Allow the liquid to cool or reduce the
quantity and select a lower speed if available.
Protect your hands with a cloth or oven gloves when
handling the hot goblet and lid.
hints
●
When making mayonnaise, put all the ingredients, except the oil
into the liquidiser. Then with the machine running, pour the oil into
the filler cap and let it run through.
●
Thick mixtures, eg pates and dips, may need scraping down. If
it’s difficult to process, add more liquid.
●
When crushing ice use the pulse in short bursts.
●
To ensure the long life of your liquidiser, never run it for longer
than 60 seconds. Switch off as soon as you’ve got the right
consistency.
●
Don’t process spices - they may damage the plastic.
●
The machine won’t work if the liquidiser is fitted incorrectly.
●
Don’t put dry ingredients into the liquidiser before switching on. If
necessary, cut them into pieces; remove the filler cap; then with
the machine running, drop them through one by one.
●
Don’t use the liquidiser as a storage container. Keep it empty
before and after use.
●
Never blend more than 1
1
⁄
2
litres (2pts 12floz) - less for frothy
liquids like milkshakes.
Note: The mill base in not interchangeable with the
FP920 glass liquidiser jug. The processor will not
operate if the wrong base is fitted. Refer to graphics
on blade unit bases.
0
m
in
m
ax
m
ulti
pro
P
ᕤ
0.3
0.5
0.7
1.1
1.3
1.5
0.9
0
m
in
m
ax
m
ulti
pro
P
0.3
0.5
0.7
1.1
1.3
1.5
0.9
ᕤ
ተ
ቱ
ተ
ቱ
A
4