Fisher-Price BARBIE H4433 - Manual (Page 12)

H4433pr-0921
12
ASSEMBLY F
H4433pr-0921
Hood
• Using safety scissors, cut the plastic ties holding the flying disc on
the hood. Dispose of the plastic ties properly.
Note to Retailer: Do not remove the plastic ties.
Plastic Tie
Flying Disc
15
Plastic Tie
14
Hood
Latch
Slot
Hood
Latch
Slot
• Insert a hood latch into one of the slots in the vehicle, near the
hood area.
• Twist the base of the hood latch 1 /
4
turn to secure it in the vehicle.
• Repeat this procedure on the other side of the hood area to attach
the other hood latch to the vehicle.
Hood
Tabs
• Insert the tabs on the hood into the slots in the front end of
the vehicle.
• Pull the hood forward and lower it closed.
Slot Slot
16
• Position the windshield so that the molded detail on the wipers
faces the front end of the vehicle.
• Insert and “snap” the two large tabs on the windshield into the
large slots in the dash.
• Pull up on the windshield to be sure it is secure.
Windshield
Wipers
Large
Tab Large
Tab
Large
Slot
17
Large
Slot