Furuno NAVPILOT 511 - Manual (Page 71)

FURUNO
NAVpilot-511/520/611
SP - 1 E7250S01A-M
080805
SPECIFICATIONS OF AUTOPILOT
NAVpilot-511/520/611
1 CONTROL UNIT
1.1 Display Monochrome LCD, 85.2 (W) x 43.6 (H) mm, 160 x 80 dots
1.2 Backlight Adjustable in 8 steps
1.3 Contrast 16 steps
1.4 Useable set 6 sets
2 PROCESSOR UNIT
2.1 Rudder mode STBY, Auto, Dodge, Remote, Advanced Auto*, Navigation*
2.2 Weather mode FULL-AUTO/ SEMI-AUTO/
MANUAL-CALM/ MANUAL-MODERATE/ MANUAL-ROUGH
2.3 Rudder angle ratio AUTO/0.1-2.0
2.4 Rudder angle equivalent AUTO/0.1-4.0
2.5 Rudder angle settings 45° max.
2.6 Weather adjustment 1° to 10°
2.7 Alarm Heading deviation, Cross-track error*, Ship’s speed*, Depth*,
Water temperature*, Log trip, Watch
*: Navigation data required
3 INTERFACE
3.1 Ports Navigation data in/out (NMEA): 1, Output (NMEA): 1
Input (NMEA): 1, I/O for Heading Sensor (NMEA): 1
3.2 Input sentences NMEA 0183, Ver-1.5/2.0/3.0
Command bearing APA, APB, BOD/XTE, RMB
Ship’s location (L/L) GGA, RMC, RMA, GLL, GNS
Ship’s location (LOP) GLC, GTD, RMA
SOG/COG VTG, RMC, RMA
STW VHW
Heading (HDG) HDT, HDG, HDM
Destination RMB, WPL
Bearing/ Distance RMB, BWC, BWR
Time RMC, ZDA
Arrival alarm AAM, RMB
Cross track error APB, XTE, RMB
Water depth DPT, DBT
Water temperature MTW
Wind speed/bearing VPW, MWD, MWV
3.3 Output sentences NMEA 0183, Ver-1.5/2.0/3.0
AAM, ALR, ASD, BWC, BWR, DBT, DPT, GGA, GLC, GLL, GTD,
GNS, HDG, HDT, HSC, MTW, MWV, RMA, RMB, RMC, RSA, VBW,
VHW, VTG, WPL, XTE, ZDA