FUJITSU MAY2073RC - Manual (Page 44)

Installation Requirements
4-2 C141-E230
4.1.2 Mounting orientations
The permissible orientations of the HDDs are shown in Figure 4.2, and the tolerance of the angle is
±5° from the horizontal plane.
As show in Figure 4.2, the drive can be installed flat on any of its six sides. Inclination from a
vertical or horizontal plane should not exceed 5
°.
(a) Horizontal –1 (b) Horizontal –2
(c) Vertical –1 (d) Vertical –2
(e) Upright mounting –1 (f) Upright mounting –2
Figure 4.2 HDD orientations
Direction of gravity