Freecom Technologies DVD RW Recorder - Manual (Page 6)

Freecom DVD RW Recorder
GB
1
6
Chapter 1: Start Up
1.1 Hardware installation
1. Connect the interface cable to the Freecom DVD RW
Recorder.
2. Connect the cable of the power supply to the Freecom
DVD RW Recorder and the power supply itself to the
socket.
3. Connect the interface cable to the interface port of your
computer.
4. Switch on the Freecom DVD RW Recorder.
Since USB .0 is backwards compatible with USB 1.1, the Freecom DVD RW
Recorder can be connected to all USB ports. When connected to a USB 1.1 port,
however, the performance (data transfer rate) of the Freecom DVD RW Recorder
will be much lower than when the drive is connected to a USB .0 port.