Fujitsu Siemens Computers 4312 FA - Manual (Page 23)

Colour monitor 4312 FA
20 - English S26361-K841-V150-1-5E19
Pin assignment D-SUB
1 5
6
10
11 15
Pin Meaning Pin Meaning
1 Video input red 9 no pin
2 Video input green 10 Sync. ground
3 Video input blue 11 Ground
4 Ground 12 DDC-Data
5 DDC ground 13 H. sync
6 Red video ground 14 V. sync
7 Green video ground 15 DDC Clock
8 Blue video ground
Trouble shooting
Should an error occur, first check the following points. If the distortion is still not eliminated, the
monitor should, if possible, be checked on another PC and/or with another data cable.
If you cannot solve the problem, contact our customer service centre.
The display is too small or not centred
The monitor recognises an undefined mode (see "Technical data").
Ê Adjust the position and the size of the display and save your settings (see " Operation of the
monitor").
No display (power indicator does not light)
Ê Check whether the monitor is switched on.
Ê Check whether the power cable is connected properly to the power adapter and to the system
unit and whether the power adapter cable is connected properly to the monitor.
Ê Check whether the mains socket is live.