FUNAI RFT909B - Manual (Page 2)

WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLI-
ANCE TO RAIN OR MOISTURE.
IMPORTANT SAFEGUARDS
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK) NO
USER SERVICEABLE PARTS INSIDE. REFER SER-
VICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
THIS SYMBOL INDICATES THAT DAN-
GEROUS VOLTAGE CONSTI-TUTING A
RISK OF ELECTRIC SHOCK IS PRE-
SENT WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT
THERE ARE IMPORTANT OPERATING
AND MAINTENANCE INSTRUCTIONS
IN THE LITERATURE ACCOMPANY-ING
THE APPLIANCE.
The important note is located on the rear of the cabinet.
1. Read instructions-All the safety and operating instruc-
tions should be read before the appliance is operated.
2. Retain Instructions-The safety and operating instruc-
tions should be retained for future reference.
3. Heed Warnings-All warnings on the appliance and in
the operating instructions should be adhered to.
4. Follow Instructions-All operating and use instructions
should be followed.
5. Cleaning-Unplug TV from the wall outlet before clean-
ing. Do not use liquid cleaners or aerosol cleaners. Use
a damp cloth for cleaning.
EXCEPTION: A product that is meant for uninterrupt-
ed service and, that for some specific reason, such as
the possibility of the loss of an authorization code for a
CATV converter, is not intended to be unplugged by
the user for cleaning or any other purpose, may
exclude the reference to unplugging the appliance in
the cleaning description otherwise required in item 5.
6. Attachments-Do not use attachments not recommended
by the TV manufacturer as they may cause hazards.
7. Water and Moisture-Do not use this TV near water, for
example, near a bath tub, wash bowl, kitchen sink, or
laundry tub, in a wet basement, or near a swimming
pool, and the like.
8. Accessories-Do not place this TV on an unstable cart,
stand, tripod, bracket, or table. The TV may fall, caus-
ing serious injury to someone, and serious damage to
the appliance. Use only with a
cart, stand, tripod, bracket, or
table recommended by the man-
ufacturer, or sold with the TV.
Any mounting of the appliance
should follow the manufactur-
er’s instructions and should use
a mounting accessory recom-
mended by the manufacturer. An appliance and cart
combination should be moved with care. Quick stops,
excessive force, and uneven surfaces may cause the
appliance and cart combination to overturn.
SUPPORT-N’installez pas cet appareil sur un meuble,
un comptoir, un trépied, un support ou une table insta-
ble. L’appareil risquerait de tomber et de blesser grave-
ment quelqu’un et, en outre, il serait sérieusement
endommagé.
9. Ventilation-Slots and openings in the cabinet and the
back or bottom are provided for ventilation and to
ensure reliable operation of the TV and to protect it
from overheating, these openings must not be blocked
or covered. The openings should never be blocked by
placing the TV on a bed, sofa, rug, or other similar sur-
face. This TV should never be placed near or over a
radiator or heat register. This TV should not be placed
in a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the manufac-
turer’s instructions have been adhered to .
10. Power Sources-This TV should be operated only from
the type of power source indicated on the marking
label. If you are not sure of the type of power supply to
your home, consult your appliance dealer or local
power company. For TVs intended to operate from bat-
tery power, or other sources, refer to the operating
instructions.
11. Grounding or Polarization-This TV is equipped with a
polarized alternating-current line plug(a plug having
one blade wider than the other). This plug will fit into
the power outlet only one way. This is a safety feature.
If you are unable to insert the plug fully into the outlet,
try reversing the plug. If the plug should still fail to fit,
contact your electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the polarized plug. PORTABLE CART WARNING
SYMBOLE D'AVERTISSEMENT POUR
LES COMPOSANTES APPAREIL ET MEUBLE A ROULETTES
S3126A
12. Power-Cord Protection-Power-supply cords should be
routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience recep-
tacles, and the point where they exit from the appliance.
13. Outdoor Antenna grounding-If an outside antenna or
cable system is connected to the TV, be sure the antenna
or cable system is grounded so as to provide some pro-
tection against voltage surges and built-up static charges.
Article 810 of the National Electrical Code, ANSI/NFPA
No. 70, provides information with respect to proper
grounding of the mast and supporting structure, ground-
ing of the lead-in wire to an antenna discharge unit, size
of grounding conductors, location of antenna-discharge
unit, connection to grounding electrodes, and require-
ments for the grounding electrode. (Fig. A)
14. Lightning-For added protection for this TV receiver
during a lightning storm, or when it is left unattended
and unused for long periods of time, unplug it from the
wall outlet and disconnect the antenna or cable system.
This will prevent damage to the TV due to lightning
and power-line surges.
15. Power Lines-An outside antenna system should not be
located in the vicinity of overhead power lines or other
electric light of power circuits, or where it can fall into
such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep
from touching such power lines or circuits as contact
with them might be fatal.
16. Overloading-Do not overload wall outlets and extension
cords as this can result in a risk of fire or electric shock.
17. Object and Liquid Entry-Never push objects of any
kind into this TV through openings as they may touch
dangerous voltage points or short out parts that could
result in a fire or electric shock. Never spill liquid of
any kind on the TV.
18. Servicing-Do not attempt to service this TV yourself as
opening or removing covers may expose you to dan-
gerous voltage or other hazards. Refer all servicing to
qualified service personnel.
19. Damage Requiring Service-Unplug this TV from the
wall outlet and refer servicing to qualified service per-
sonnel under the following conditions:
a. When the power supply cord or plug is damaged or
frayed.
b. If liquid has been spilled, or objects have fallen into
the TV.
c. If the TV has been exposed to rain or water.
d. If the TV does not operate normally by following the
operating instructions. Adjust only those controls that
are covered by the operating instructions, as improper
adjustment of other controls may result in damage and
will often require extensive work by a qualified techni-
cian to restore the TV to its normal operation.
e. If the TV has been dropped or damaged in any way.
f. When the TV exhibits a distinct change in perfor-
mance-this indicates a need for service.
20. Replacement Parts-When replacement parts are
required, be sure the service technician uses replace-
ment parts specified by the manufacturer that have the
same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, injury to
persons or other hazards.
21. Safety Check-Upon completion of any service or
repairs to this TV, ask the service technician to perform
routine safety checks to determine that the TV is in
proper operating condition.
22. Heat-This TV product should be situated away from
heat sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce heat.
FIGURE A
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
ELECTRIC
SERVICE
EQUIPMENT
GROUND
CLAMP
NEC - NATIONAL ELECTRICAL CODE POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
S 2 8 9 8 A
GROUND CLAMPS
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
ANTENNA
LEAD IN
WIRE
OPERATING CONTROLS AND FUNCTIONS
MENU VOLUME CHANNEL POWER
6 1 2 3 4 5
DC.13.2V
OUT
AUDIO VIDEO
ANT.IN
REMOTE
EXT.SPK.8ΩMIN
1
IN
2
I
I
16 17 18 20 21 19 22 23
- FRONT PANEL - - REAR PANEL -
Notes:
● A unified remote control unit will enable
you to control main function of Funai Video
Player/Recorder.
● To use as TV remote control, press TV but-
ton on the remote control, then press the
ENTER button within 10 seconds.
● To use as VCP or VCR remote control, press
VIDEO button on the remote control, then
press the ENTER button within 10 seconds.
1. MENU button- Press to display the menu
on the TV screen.
2. VOLUME ∆/∇ buttons- Press to control
the volume level.
Press to determine a setting mode from the
menu on the TV screen. (only the VOL
∆
button)
Press to select or adjust from a particular
menu. (for example: Language Selection,
Channel Presetting, Picture Adjustment)
3. CHANNEL ▲/▼ buttons- Press to select
memorized channel.
Press to select a setting mode from the
menu on the TV screen.
Press to select item you want to adjust in
the picture control mode.
Keep pressing the CH(annel)
▲ or ▼ but-
ton to seek your available channel.
4. Infrared Sensor Window- Receives the
infrared control signals from the remote
control unit.
5. Power indicator- Lights up when the
power is turned on.
6. POWER button- Press to turn the TV ON
and OFF.
7. MUTE button- Press the MUTE button to
turn off the sound portion of the TV pro-
gram. (Volume level display turns LIGHT
RED from LIGHT BLUE.) Press the
MUTE button again or press the VOL(ume)
∆ or ∇ button to restore sound.
8. SLEEP button- Press the SLEEP button to
display the sleep timer and start the func-
tion. The shut off time can be determined
by the number of times you press the but-
ton. (0, 10, 20, 30,..90, 0 minutes)
9. INPUT SELECT button- Press to change
the TV to TV mode, Game mode or Video
mode.
10.DISPLAY button- Press to display the
channel number on the screen. If you press
it again, the channel number will disappear.
11.CHANNEL NUMBER button- Press two
digits to directly access the desired channel.
Remember to press a "0" before a single
digit channel.
+100 button- Press to select cable channels
which are equal or greater than number
100.
12.TV button- Press to change the remote
control to TV mode.
13.VIDEO button- Press to change the
remote control to Video mode.
14.ENTER button- Press to set the remote
control to TV mode or Video mode.
15.VCP/VCR operation buttons- Please refer
to Funai Video Player/Recorder owner’s
manual for function.
16.DC 13.2V supply jack
17.AUDIO IN jacks- Connect to the audio
output jack of a video camera, VCR, or
VCP.
18.AUDIO OUT jack- Connect to the audio
input jack of a VCR or VCP.
- REMOTE CONTROL -
TV
POWER
1 2 3
4 5 6
7 8 9
+100 0
TV
SLEEP
DISPLAY VIDEO
INPUT
SELECT
VOL
CH
CH
VOL VOL
TRACKING PLAY REW F.FWD
STOP PAUSE/STILL
MEMORY
COUNTER RECORD EXIT
RESET
MENU
ENTER QUICK-FIND TIME
SEARCH
INDEX
SLOW
MUTE
VIDEO
POWER
11
10
15
9
3
8
3
13
6
7
2 2
1
12
14
15
19.VIDEO OUT jack- Connect to the video
input jack of a VCR or VCP.
20.VIDEO IN jacks- Connect to the video
output jack of a video camera, VCR, or
VCP.
21.ANT(enna). IN jack- Connect to an anten-
na, cable system, or satellite system.
22.EXT.SPK.8 ΩMIN jack- Connect to an
another speaker. If an external speaker is
connected, no sound is heard from the
built-in speakers.
23.REMOTE jack- Connect to the remote
jack of a VCR or VCP.
INSTALLING THE BATTERIES
Slide the battery compartment cover on the
remote unit.
Insert 2 "AA" penlight batteries into battery
compartment in the direction as indicated by
the polarity (+ / -) markings. Batteries installed
with incorrect polarity may damage the remote
unit.
Replace the cover.
3
2
1
L0941.QX33 02.8.28 6:17 PM Page 2