Fujitsu Siemens Computers Easel Case FPCC49 - Manual (Page 3)

3
The rear of the easel case has a large flap that is hinged on
the bottom and attached to the case on the top with a Velcro
strip. This flap is used as the easel base. (Figure 2)
Figure 2. Easel Case - Back, closed
1. Separate the Velcro® strip from the bottom of the cover
on the front. (Figure 3).
Rear flap
Velcro strip
location
(between flap
and case)
easel case.fm Page 3 Tuesday, March 16, 2004 1:46 PM