Field Controls UV-Aire Air Purifying System UV-500C User Manual
Page 4
page 4
WARNING:
Never expose eyes or skin to UVC light from any source. Looking directly at the UVC light may cause permanent eye damage or blindness.
Never operate the UV-Aire Air Purifying System out of the plenum. Avoid touching the glass portion of the lamp with your hands.
Figure 7
NOTE:
If the LCD display reads differently use the point of a pen or paper clip to press the reset button beside
the LED for either the lamp or the filter to reset the days as shown above.
OPERATION
Place the UV-500C in the desired area; plug the power cord into a standard 120-volt wall receptacle.
1.
Turn the speed control knob clockwise to turn on the unit and to adjust the motor/fan speed to the
2.
desired airflow. (See Figure 7)
After the fan has started, the LED light for the lamp and filter will show a continuous GREEN color
3.
indicating proper unit operation.
Slide the filter drawer out of the base. Remove one of the four filters
10.
from its plastic bag and place it in the drawer with arrow/carbon side
up. (See Figure 6)
Slide the filter drawer with filter back into the base unit. Press firmly
11.
until drawer catches.
NOTE:
The positive catch eliminates vibration and ensures proper function of the filter.
Unwind the power cord from underneath the unit and insert plug into any standard 120-volt outlet.
12.
Turn the speed control knob clockwise to turn the unit on. After the fan has started, the LED lights will
13.
show a continuous GREEN color and the LCD will indicate 365 days left for the lamp and 90 days for
the filter. (See Figure 7)
Figure 6