Fantom Vacuum PT205HA - Manual (Page 7)

5
GETTING TO KNOW YOUR LEAF BLOWER
1. On/Off Switch
2. Latch Support
3. Blower/Vacuum Tube
4. Vacuum Inlet
5. Blower Outlet
6. Guide Wheel 7. Vacuum Bag Hook
8. Vacuum Collector Bag (x2)
9. Blower/Vacuum Selection Lever
10. Air Vents
11. Handle
12. Shoulder Strap
Technical Specifications
Voltage: 120V., 60Hz.
Current: 12 Amps.
Use of ear protection is recommended when using this unit.
* Illustrations may differ from actual product.
OPERATING INSTRUCTIONS
How to Use the Power Switch
8
Warning : If you do NOT fully
seat the extension cord on the inlet
plug, the loose plug could lead to
overheating and cause a fire, or electrical
shock.
Ensure that you fully seat the cord on the
plug and use the cord lock feature to
secure the cord.
Important: Check the power cord
frequently during use for holes in the
insulation or other damage. Do NOT use
a damaged cord.
Do NOT run the cord through standing
water or wet grass.
The leaf blower is equipped with a two way
On/Off switch. (Fig. 14) ‘O’ is OFF. ‘I’ is for
“ON”.
How to Attach the Extension Cord
Fig. 11
3. Slip loop through power cord
guide. (Fig 12)
Fig. 13
4. Latch loop of power cord onto hook.
(Fig. 12)
5. Insert the plug of the leaf blower into
the outlet on the extension cord.
(Fig. 13)
Note : Do NOT use an extension cord
over 150 feet long.
1. Use only with a 2 conductor
extension cord intended for outdoor
use with a polarized plug, with one
blade larger than other, UL listed.
2. Form a loop with the extension cord.
(Fig 11)
Fig. 12
Power Cord
Guide
Power Cord
Hook
ON
OFF
Fig. 14