Fujitsu Siemens Computers LifeBook N6460 User Manual

Getting started with your new fujitsu lifebook, Registering genuine windows vista™ with microsoft, Activate additional utilities

Advertising
background image

RIGHT PANEL

LEFT PANEL

Quick Tips

It takes approximately 3 hours to
charge a battery if the notebook
is turned off or is in suspended
mode. In battery mode the
processor runs at half speed to
conserve battery life. SpeedStep
is always on. CPU speed will
change depending on the load.

Optimizing Battery Life
• Set power management setting

to Maximize Battery Life

• Adjust display brightness levels

to lowest comfortable setting

• Remove PC Cards and Express-

Cards when not needed

• Utilize Suspend mode when

not using your notebook

• Turn off Wireless LAN

when not in use

• Close unused programs
• Remove unused USB

powered devices

• Read the Power Management

section in your User’s Guide
for additional features

Adjusting display brightness
• Fn + F6 to decrease brightness
• Fn + F7 to increase brightness

Drivers

Look for the latest drivers on the
Drivers and Applications Restore
Disk. Right-click the FDU icon
and select “update”, or go to
us.fujitsu.com/computers.

Status Indicators

Battery Charging
Green, solid: Fully charged
or no battery installed.

Orange, solid: Being
charged.

Orange, blinking: Charging
suspended because battery
temperature too high.

Off: Not charging because
AC adapter is not connected.

Battery Status
Green, solid: Between
50% and 100% charged.

Orange, solid: Between
13% and 49% charged.

Red, solid: Between 0%
and 12% charged.

Red, blinking: There is a
problem with the battery.

Off: No battery is installed
or the system is shut off.

Hard Drive/Optical
Drive Access
Lets you know if your internal
hard drive or optical drive
are being accessed.

Email
Shows when you have
received new email.

Number Lock
Visible: Activated.

Caps Lock
Visible: Activated.

Scroll Lock
Visible: Activated.

BACK PANEL

Getting started with your new

Fujitsu LifeBook

®

N6460 notebook

This convenient guide will lead you through the start-up process in seven easy steps and will also offer some valuable tips.

Following are some common indicators.

Top of Keyboard
Status Indicator

Note: When using Windows Vista™ Media Center
Edition 2005 in full screen mode, the function
keys’ status cannot be seen on the LCD panel.
If you “minimize” or “restore down” (shrink) the
window, the function keys’ status will appear.

Touchpad Pointing Device

Stereo Speakers

Display Panel Latch

Display Panel

Status Indicator Panel

Keyboard

Power/Suspend/
Resume Button

Application/Media
Player Buttons

Visual Optimizer
Button

Wireless LAN Switch

Volume Control

Fingerprint Recognition

Sensor/Also works as

Scroll Button

USB 2.0 Port

Sub Woofer Air Chamber (bottom of unit)

ExpressCard Slot

PC Card Slot

PC Card Eject Button

ExpressCard Eject Button

Memory Stick/SD/xD Card Slot

IEEE 1394 Port

Headphone Jack

Microphone Jack

DC Power Jack

Optical Drive

Optical Drive Eject Button

S-Video Out Port

LAN Port

USB Ports

Lock Slot

Modem Port

External Video Port

Air Vents

USB Port

When prompted, enter your User Name, Password and select

an icon for your account.
On next screen, name your computer and choose a desktop background.

When “Help protect Windows automatically” appears,

choose one of the settings.
On next screen, set time and date.

The “Thank you” screen follows, with an offer for free Norton

software. After Windows checks the system performance,
it will boot up for the fi rst time.
Important: During the setup procedure, do not disconnect the

power supply, press any buttons, or use any peripheral devices
such as a mouse, keyboard, or remote control.

NOTE: Steps 4 and 5 will cause the display to go blank for a
period of time. This is normal. DO NOT attempt to interface
with your LifeBook in any way while the display is blank.

4. Registering Genuine Windows

Vista™ with Microsoft

After Genuine Windows Vista initial boot, the “Welcome Center”

will appear. If the “Register Windows Online” icon is not seen in the
window, click on “Show all 14 items”.
Click on “Register Windows Online” and follow the instructions.

5. Activate Additional Utilities

If you have the wireless LAN confi guration, please ensure the
wireless LAN switch is ON.
The fi rst time you boot up your system, you will see a “Primary
Settings for the PC” window. This window explains the installations
which will be performed by the Click Me! utility. If you click [Execute],
Click Me! will begin installing. If after clicking the button you receive
a “User Account Control” window, you will be asked for permission
to continue. Click [Yes] to continue. If you cancel, the “Click Me!”
icon will appear on your desktop for later installation.

6. Install Additional Software if needed

Insert application disc into media drive and follow on-screen instructions.

7. If you purchased the TV Tuner Option

Please see the TV Tuner User’s Guide for detailed instructions.

1. What’s in the Box

Check to see that all of the following are in the box:
❍ LifeBook notebook
❍ Lithium ion battery, pre-installed
❍ AC adapter with power cord
❍ Phone/modem (RJ-11) telephone cable
❍ Drivers and Applications Restore disc
❍ Recovery and Utility disc
❍ User’s Guide
❍ International Limited Warranty Booklet and Registration
❍ Microsoft

®

associated product materials

❍ Microsoft

®

Applications Software CD

Depending upon your confi guration, the following
may also be included:
❍ PowerDVD (for Blu-Ray confi guration)
❍ CyberLink MakeDisc (for Genuine Windows Vista™
Home

Premium)

❍ Additional Lithium ion battery
❍ Remote control and IR Reciever (for Genuine Windows Vista™

Home Premium and Genuine Windows Vista™ Ultimate)

❍ TV Tuner Express card and software CD (for Genuine Windows

Vista™ Home Premium)

2. Turn on Your Notebook

Plug the AC adapter into your notebook.

Plug the power cord into the AC adapter.

Connect the power cord to an electrical outlet.

Connect the phone cable or an ethernet cable (with internet access)

to your notebook and to a wall jack.
Press the power button.

The notebook is now on and the battery is being charged.

• The notebook will begin a power-on self test. Once successfully completed,

the operating system will begin the initialization process.

3. Start Genuine Windows Vista™

the fi rst time

Select Country of Region, Time and Currency, and Keyboard Layout,

then click next.
Read and accept the End User License Agreements (EULAs).

CLICK ME

HDMI Port

Advertising