Fisher-Price H8910 - Manual (Page 6)

6
Problem Cause Solution
No bubbles Not enough bubble solution in
bubble chamber Press down on bubble solution
bottle for 15 seconds to refill.
Bubble chamber is clogged
and dirty Follow instructions in “Let’s
Clean Up” section to clean bubble
chamber thoroughly.
You have not walked far enough
to produce bubbles The bubble mower needs to be
pushed a minimum of 15-20
walking steps before bubbles
begin to flow.
You are walking too quickly Walk at a slow, steady pace.
The rear wheels do not contact
the ground Push the mower so that the
rear wheels always contact
the ground.
Silicone or oily lubricants
got into the bubble chamber Never use silicone or oily
lubricants on this product (the
wheels). Bubbles will not form
if even a very small amount of
these substances get into the
bubble chamber.
Bubble solution is leaking from
the mower Bubble chamber over-filled Fill only by using the filler cap
which will dispense the correct
amount of solution.
The mower is used on an
inclined surface Use the mower only on flat,
level ground.
Bubble solution is foaming Bubble chamber is clogged Follow instructions in "Let's
Clean Up" section to clean bubble
chamber thoroughly.
Problems and Solutions
CONSUMER ASSISTANCE
1-800-432-5437 (US & Canada)
1300 135 312 (Australia)
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.
Hearing-impaired consumers: 1-800-382-7470.
Outside the United States:
Canada: Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2; www.service.mattel.com.
Great Britain: Mattel UK Ltd, Vanwall Business Park,
Maidenhead SL6 4UB. Helpline: 01628 500303.
www.service.mattel.com/uk
Australia: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.
New Zealand: 16-18 William Pickering Drive,
Albany 1331, Auckland.