Quick reference – Firstech, LLC. 2W900FMR-2ND-5P User Manual

Page 6

Advertising
background image

11 By Firstech, LLC

By Firstech, LLC 10

Quick Reference

STEP 1: Enter remote programming mode by holding down buttons (II + III) for 2.5 seconds. The remote will beep once and the LCD will read
“Prog” to indicate that you have successfully entered programming mode.

STEP 2: After entering programming mode. Adjust the time settings by tapping button (I) to change the hour and tapping button
(II) to adjust the minutes.

STEP 3: Once the desired time has been set, exit remote programming by holding down buttons (II + III) for 2.5 seconds. The remote will beep
three times indicating that you have successfully exited programming mode.

p’‡’‰Ž‡@”ˆ…@cŒƒ‹@Hlcd@r…”…@oŽŒ™I

Quick Reference

Rw™@r…”…@b•””Ž@f•Žƒ”‰Ž“

Button

Duration

Additional Programming Function / Description

Required

0.5 seconds

no

Locks doors and/or arms alarm. Tap again to unlock door and/or disarm alarm.

2.5 seconds

Option 2-11

Run time extender. Resets remote start and turbo run time while vehicle is remote started

0.5 seconds

no

Aux 1. Triggers the auxiliary 1 output (most commonly used for rear defrost or window roll-down)

2.5 seconds

no

Activates the remote start. Repeat and remote start will shut off

0.5 seconds

no

Aux 2. Triggers the auxiliary 2 output (most commonly used for rear defrost or window roll-down)

2.5 seconds

no

Trunk pop. Triggers the trunk release output and opens the vehicle’s trunk.

0.5 seconds

no

Car Check (updates vehicle status on remote pager) / Secure Auxiliary / Temperature Display / Vehicle Voltage Display

2.5 seconds

no

Panic/vehicle locator (flashes vehicle’s parking lights and sounds siren and horn)

0.5 seconds

no

Turns siren chirps on/off (Note: With the siren chirps off, it will still sound in the event the alarm is triggered)

2.5 seconds

no

Option programming menu 1. For use during installation.

0.5 seconds

no

Valet mode (see page 5 for details)

2.5 seconds

no

Turns the shock sensor on/off. (Alarm or Alarm/Starter systems only)

0.5 seconds

Option 1-9

Drive lock. Activates ignition controlled door locks.

2.5 seconds

no

Option programming menu 2. For use during installation.

I

I + II

I + III

I + IV

II

III

IV

Advertising
This manual is related to the following products: