Fisher-Price K7117 - Manual (Page 2)

Your child is bound for
a world of adventure!
Battery Installation
Vehicle
• Locate the battery compartment on the
back of the vehicle.
• Loosen the screws in the battery
compartment door with a Phillips
screwdriver. Lift the battery compartment
door and insert three “AAA” (LR03)
alkaline
batteries.
• Close the battery compartment door
and tighten the screws with a Phillips
screwdriver. Do not over-tighten.
Battery
Information
Remote Controller
• Locate the battery compartment on the bottom
of the remote controller.
• Loosen the screw in the battery compartment
door with a Phillips screwdriver. Remove the
battery compartment door and insert three
“AAA” (LR03) alkaline batteries.
• Replace the battery compartment door and
tighten the screw with a Phillips screwdriver.
Do not over-tighten.
1.5V x 6
“AAA” (LR03)
We recommend the use of alkaline batteries
for longer battery life .
IMPORTANT! Under normal use conditions, the batteries in the vehicle will require
replacement more often than the batteries in the remote controller. For additional
information, see the troubleshooting section.
• Do not mix old and new batteries or
batteries of different types: alkaline,
standard (carbon-zinc) or rechargeable
(nickel-cadmium).
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods
of non-use. Always remove exhausted
batteries from the toy. Dispose of batteries
safely. Do not dispose of product in a fire.
The batteries inside inside may explode
or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or
equivalent type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the
toy before charging.
• If removable, rechargeable batteries are
used, they are only to be charged under
adult supervision.
Battery Safety Information
In exceptional circumstances, batteries may leak fluids that can cause a chemical burn
injury or ruin your toy. To avoid battery leakage:
All Aboard!
3-Position Remote Controller
Use with the
Lift ‘N Load
Quarry
™ for
added fun!
Drive forward to the “dump station”
and push the boulder in.
Sold separately and subject to availability.
Hint: We do not recommend using the
vehicle on carpets. For best performance,
use on the track provided or hard,
flat surfaces.
• Press the power button on top of the
vehicle. The ready light turns on.
• Hold the remote controller with the
stick facing you. Point the remote
controller toward the vehicle and
push the stick forward. The vehicle
moves forward around the track.
• Pull the stick back a little to stop
the vehicle.
• Pull the stick all the way back and the
vehicle travels in reverse. Release the
stick to stop.
Hints:
• If you do not operate the remote
controller for a few minutes, the
vehicle shuts off and the ready
light turns off. Press the vehicle
power button, and operate the
remote controller to restart.
• This toy works best if you have a
clear path between the remote
controller and the vehicle. Point
the remote controller at the vehicle.
The maximum range of the remote
controller is about 12 feet (3.66 m).
➊
FORWARD
(WITH SOUND EFFECTS)
➋ FORWARD
➌ Off
➍ Reverse
• Protect the environment by not
disposing of this product with
household waste (2002/96/EC). Check
your local authority for recycling
advice and facilities (Europe only).
Drive in reverse and “dump” the boulder in.
➊ ➋ ➌ ➍
Your child is bound for
a world of adventure!
POWER BUTTON