Install cabinet into window, Attach side curtains to window frame, Attach support brackets – Friedrich CP14 User Manual

Page 8

Advertising
background image

8

Install Cabinet into Window

Handle air conditioner carefully and gently.

Be sure your air conditioner cabinet does not fall out of the
opening during installation or removal.

The place where the power cord exits the air conditioner
should be no more than 4 ft (122 cm) from a grounded

3 prong power outlet.

Do not place cabinet where front louvers will be blocked.

Do not place cabinet where outside louvers will be blocked.

1. Center empty cabinet in window. Check that lower rail of air

conditioner cabinet is behind and against back side of
windowsill. Maintain a firm hold on the air conditioner
cabinet. Lower window sash to hold cabinet in place.

2. Measure the distance between the right-hand side of the

cabinet and the inside of the window channel.

3. Repeat for the left side. Adjust the cabinet until the distance

on each side is the same.

4. Use a

³⁄₁₆" drill bit to drill 4 starter holes ³⁄₈" deep through the 4

holes in the cabinet and into the windowsill.

5. Attach cabinet to windowsill with 4 - #10 x

¹⁄₂" pan-head

Phillips screws.

Attach Side Curtains to Window Frame

1. Pull left-hand curtain out until it fits into window channel. Use

a

³⁄₃₂" drill bit to drill a starter hole through the hole in the

curtain housing and into the lower window sash.

Front View

Top View

2. Insert one of the #10 x

³⁄₄" round-head screws through the

threaded hole in the top of the curtain.

3. Repeat for right-hand curtain.

Attach Support Brackets

A. Window sash
B. Empty cabinet

C. Window channel

B

A

C

A

A

B

A. Left-hand curtain
B. Window channel

C. #10 x

³⁄₄

" round-head screw

A. #10 x

³⁄₄

" round-head screw

B

A

C

A

A. Align holes in cabinet with holes in support bracket.

A

B

B. #10 x

7

/

8

" 1

D. Window Seal

4. Use a

³⁄₁₆" drill bit to drill 4 starter holes ³⁄₈" deep through the 4

holes in the cabinet and into the windowsill.

5. Attach cabinet to windowsill with 4 - #10 x

¹⁄₂" pan-head

Phillips screws.

6. Check that air conditioner cabinet is tilted to the outside so

that water will run to the outside.

A. #10 x

⁄₂

" pan-head Phillips screws

B. Windowsill

A

A

B

D

Advertising
This manual is related to the following products: