FieldServer FS-8700-73 - Manual (Page 12)

FS-8700-73 BACnet MSTP Driver Manual Page 12 of 48
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.FieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-2269 Toll Free: (888) 509-1970 email: [email protected]
Driver Specific Map Descriptor Parameters
Column Title Function Legal Values
Node_Name Name of Node to fetch data from
One of the Node names
specified in Section 0
Object_Type
(Alias = Data_Type) Type of object. Refer to Appendix D.1 for more
information. AI, AO, AV, BI, BO, BV, MI,
MO, MV, NC
Object_Instance
(Alias = Address)
Instance of the object on the device. 0, 1, 2, 3, …4194303
Property The BACnet property to be read. Refer to Appendix D.2
Data_Array_Low_Scale* Scaling zero in Data Array -32767 to 32767, 0
Data_Array_High_Scale* Scaling max in Data Array -32767 to 32767, 100
Node_Low_Scale* Scaling zero in Connected Node -32767 to 32767, 0
Node_High_Scale* Scaling max in Connected Node -32767 to 32767, 100
Length*
Used to create an array of sequential Object_Instances
on an Object_Type. 1 to max point count of
the FieldServer, 1
Array_Index*
When referencing Multistate properties, allows the
user to specify the index of the property to be read. If 1
is specified, the first one will be read, if 2 is specified,
the second will be read, etc. If 0 is specified, the driver
will return the total number (count) of array items
linked to the property. If the parameter is not
specified, a list of all items will be returned. Refer to
Appendix A.3
0 to max number of array
items in the BACnet
Property, -
Write_Priority*
Allows the driver to specify the write priority used to
write an output.
1..16, 16
Linked_Map_Descriptors*
This parameter allows the linking of Map Descriptors to
an active read or write Map Descriptor in order to
construct
a ReadPropertyMultiple or
WritePropertyMultiple transaction. Refer to Appendix
A.9
The name of a previously
defined
active Map
Descriptor, -
Length*
When the optional Length parameter is set to a value N,
the Map Descriptor will include N consecutive instances
of the specified Object_Type. For example, if a Map
Descriptor specifies Object_Type, Address 4 and Length
3, this means that the AO instances 4, 5 and 6 will be
included in the read or write transaction. The
corresponding Data Array values are in consecutive
positions in the Data Array, starting at the specified
Data_Array_Offset.
Any positive integer that
falls between the range
of the Data_Array_Offset
and
the
Data_Array_Length as
specified in Section 4, -
Refer also to Appendix
A.9
Timing Parameters
Column Title Function Legal Values
Scan_Interval* Rate at which data is polled 0-32000, 2s