Food Quality Sensor R-320H - Manual (Page 19)

SEC R320H
17
TINSEA976WRRZ-D32 SEC R320H
Touch START pad. 6
Touch number 3 .
2
Enter the start time.
3
4 3 0
3
Touch CLOCK pad.
4
Enter cooking program.
5
2 0 0 0
x 6
Touch TIMER pad and
number pad 1 . 1
MULTIPLE SEQUENCE
COOKING
Your oven can be programmed for up to 4 automatic
cooking sequences, switching from one power level
setting to another automatically.
Sometimes cooking directions tell you to start on one
power level and then change to a different power
level. Your oven can do this automatically.
• Suppose you want to cook roast beef for 5 minutes
at 100% and then continue to cook for 30 minutes
at 50%.
P R O C E D U R E
1
Then enter second
cooking time.
Touch POWER LEVEL
pad 6 times for 50%
power.
2
First enter cooking time.
Then touch POWER
LEVEL pad once for
100% power.
NOTE:
1. If POWER LEVEL pad is touched once, HIGH will
be displayed.
2. If 100% is selected as the final sequence, it is not
necessary to touch the POWER LEVEL pad.
3. If you wish to know power level, simply touch the
POWER LEVEL pad. As long as your finger is touch-
ing the POWER LEVEL pad, the power level will be
displayed.
4. Keep Warm Plus can be programmed continuously
even if 4 cooking sequences have been set.
x 1
Touch START pad. 3
TIMER
• Suppose you want to time a 3-minute long distance
phone call.
P R O C E D U R E
2
Enter time.
Touch TIMER pad
again. 3
CUSTOM HELP
Custom Help provides 4 features which make using your
oven easy because specific instructions are provided
in the interactive display.
1. CHILD LOCK
The Child Lock prevents unwanted oven operation
such as by small children. The oven can be set so
that the control panel is deactivated or locked. To
set, touch CUSTOM HELP, the number 1 and then
touch the START pad. Should a pad be touched,
CHILD LOCK ON will appear in the display.
To cancel, touch CUSTOM HELP and STOP/CLEAR pads.
2. AUDIBLE SIGNAL ELIMINATION
If you wish to have the oven operate with no audible
signals, touch CUSTOM HELP, the number 2 and
then touch STOP/CLEAR pad.
To cancel and restore the audible signal, touch CUSTOM
HELP, the number 2 and then touch the START pad.
3. AUTO START
If you wish to program your oven to begin cooking
automatically at a designated time of day, follow this
procedure:
• Suppose you want to start cooking a stew for 20 min-
utes on 50% at 4:30. Before setting, check to make
sure the clock is showing the correct time of day.
P R O C E D U R E
1
Touch CUSTOM
HELP pad.
NOTE:
1. Auto Start can be used for manual cooking if clock is set.
2. If the oven door is opened after programming
Auto Start, it is necessary to touch the START pad
for Auto Start time to appear in the readout so that
the oven will automatically begin programmed cook-
ing at the chosen Auto Start time.
3. Be sure to choose foods that can be left in the oven
safely until the Auto Start time. Acorn or butternut
squash are often a good choice.
4. If you wish to know the time of day, simply touch the
CLOCK pad. As long as your finger is touching the
CLOCK pad, the time of day will be displayed.
O T H E R C O N V E N I E N T F E A T U R E S
x 6
3 0 0 0
5 0 0
3 0 0
1
SEC R320H O/M,P16-23 03.5.21, 9:27 PM 17