FUJITSU P42HCA10 - Manual (Page 9)

E-9
6 Sound 1 input terminal (AUDIO1 INPUT)
7 Sound 2 input terminal (AUDIO2 INPUT)
8 Sound 3 input terminal (AUDIO3 INPUT)
Connect this terminal to the sound output terminal of your VCR, etc. (See P.E-30 for the selection of audio input for video input.)
* This terminal is not available for P42VCA10/P42HCA10/P50XCA10.
9 RGB2 input terminal (RGB2 INPUT/BNC)
Connect this terminal to the PC’s display (analog RGB) output terminal.
0 RGB2 synchronization switch (SYNC SW TTL/ANALOG (75 Ω))
This switch is used to terminate horizontal (H) terminal and vertical (V) terminal, out of RGB2 input terminals, with 75 Ω .
TTL : Does not terminate.
ANALOG (75 Ω): Terminates.
A Video input terminal (VIDEO INPUT)
Connect this terminal to the video output terminal of your VCR.
B S-Video input terminal (S-VIDEO INPUT)
Connect this terminal to the S-video output terminal of your VCR.
English
02.12.3, 10:34 Page 9