FELLOWES OD500C - Manual (Page 4)

3
Product Profile
This product is built to shred paper and staples. It is n o t built to
take paper clips, continuous forms, adhesive labels, transparen-
cies, newspaper, cardboard or any plastic. Using it for these pur-
poses is likely to cause irreparable damage.
Confetti
Cut
OD500C
Sheet capacity* 5 sheets
Paper shred size 5/32" x 2" (3.9 x 50 mm)
Maximum paper width 9-1/2" (240 mm)
Recommended daily capacity 10-20 shredding passes
Maximum running time 5-7 minutes
Automatic cool-down period 15 minutes
Voltage 120 V / 60 Hz / 1.5 A
*Based on 20 lb., 8-1/2" x 11" (70gsm, A4) paper with shredder operating at rated voltage; heavier paper, high humidity, or
other than rated voltage may reduce sheet capacity.
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING
While setting up shre d d e r
• Check shredder for damage or defects; some paper particles in the basket are normal
due to product testing and does not indicate a defect.
• If the cord is damaged do not replace cord or use the machine. Return machine for a
replacement.
• Avoid touching exposed blades on underside of OD500C confetti-cut shredder head.
• Plug power cord in an outlet that can easily be reached.
• Do not place shredder near or over a heat or water source.
While operating shre d d e r
• Keep hands and hanging objects (jewelry, ties, loose clothing,
long hair, etc.) away from paper entry.
• Keep children and pets away from the shredder.
When not in use
• Always turn off and unplug shredder
• Unplug before emptying basket
• Do not open shredder head: Danger of electric shock.
N O T E : Do not use flammable synthetic oil, petroleum-based products
or aerosols of any kind on or near product at any time.