FUJITSU MHV2100BH - Manual (Page 26)

Maintenance and Diagnosis
1-10 C141-F074
Table 1.1 Status Field contents
bit Contents
BIT0=1 Shown in Table 1.2
BIT1, 2 It is not necessary to take any measure when other bits are
normal, in spite of these bits. (Normal)
BIT3=1
BIT4=1
BIT5=1
BIT6=0
BIT7=1
Any of these
cases.
(1) Check whether vibration is transmitted because of the way
the disk drive is mounted.
(2) Check the power, cable, and connector.
(3) If it is concluded that the disk drive is the cause, replace the
disk drive.
Table 1.2 Disposition for Error Field contents
Error bit Method of disposition
BIT0
BIT1
BIT4
BIT6
Any of these
bits are “1”. If it is concluded that the disk drive is the cause, replace the
drive.
BIT4=1 and BIT2=1
or
BIT3=1 and BIT2=1
or
BIT2
BIT7
Any of these
bits are “1”.
(1) Check the status of the host system, cable, and drive.
(2) If it is concluded that the disk drive is the cause,
replace the drive.