Fisher-Price KICK'N CRAWL H8094 - Manual (Page 3)

3
Overhead Gym Assembly
Tubes
Support
Support
Slots
Quilt
Straps
• Place the quilt, print side up, on a flat surface.
• Fit the two straps on each side of the quilt down through the slots in the
supports. Make sure the tab at the end of each strap forms a “T” under the
support. Pull up on the quilt to be sure it is secure to the supports.
• Fit the two, small fastener straps on
each end of the tubes through the
slots inside the circular openings in
the supports. Fasten the straps to
secure the tubes to the supports.
• Fasten the activity toys to the straps
on the arch.
• Squeeze the stem to inflate the ball.
Now, fasten the ball to the strap on
the other arch.
Fastener Straps
Fastener Straps
Bottom View