Genz-Benz STREAMLINER 900 - Manual (Page 7)

7
Declaration of Conformity
(89/336 EEC-EMC Directive)
Manufacturer’s Name: Genz Benz, a division of KMC Musicorp
Manufacturer’s Address: 7811 East Pierce Street
Scottsdale, AZ 85257, U.S.A.
Product Type: Audio Amplifier
Model Number: Streamliner™ 900
Operating Power Condition: 100/110/115/220/230/240 V, 50/60 Hz
Effective Date: January 15, 2011
Conforms to the Following Standards: [X] EN 55013: 2001 + A1: 2003
[X] EN 55020: 2002 + A1: 2003
[X] EN 60065: 2002 + A11: 2008
[X] IEC 61000-3.3: 1994 + A1: 2001
[X] IEC 61000-4.2
[X] IEC 61000-4.3
[X] IEC 61000-4.4
[X] FCC 15.107 and 15.109
[X] RoHS Directive 2002/95/EC
[X] WEEE Directive 2002/96/EC
[X] CE Mark LV Directive 73/23 EEC
KMC Musicorp
7811 E. Pierce St. Scottsdale, AZ 85257
Ph: 480-941-0705 Fax: 480-946-2412
www.genzbenz.com
REV 2
BLOCK CIRCUIT DIAGRAM
Genz Benz, Streamliner™ and 3DPM™ are trademarks of Genz Benz and KMC Musicorp
The Instrument input feeds a conventional grounded cathode voltage amplifier which is then followed by a second
grounded cathode voltage amplifier stage. The second voltage amplifier feeds a cathode follower pair that makes
up the Baxandall inspired, tube based, Bass and Treble shelving equalization and active feedback type boost/cut
midrange EQ network. Interaction between the 3 eq sections is minimal yielding more precise and predictable tonal
control. Additional make-up gain and output impedance scaling is handled by the last grounded cathode voltage
amplifier – cathode follower pair, then into a 4th order high pass driver protection filter, then handing off the signal to
the power amp through our proprietary 3DPM™ — 3 Dimensional Power Management technology.