GE 00024178 - Manual (Page 28)


Erasing a Stored Number
1. Press the STORE button.
2. Press the memory location (0-9, A, B, C) to be erased.
3. Press the
DELETE button.
Copying Caller ID Memories to User Memory
1. Press the SKIP or REPEAT buttons to view the caller number and name you want
to copy.
2. Press the DIAL button to change the format (11 or 10 or 7 digits number format) as
desired.
3. Press the STORE button.
4. Press the memory location (0-9, A, B, C). The number flashes if there is a number
already stored in the memory location.
5. Press the STORE button to enter the edit mode, and then press the STORE button
again to edit the name.
NOTE: You may select a different memory location by pressing the
SKIP or REPEAT button to scroll through the memories or press a
number key (0-9, A, B, C).
6. Press the STORE button to confirm and save.
NOTE: If the name you want to enter is longer than 12 characters,
only the first 12 characters will be copied into memory.