Graco 8482 - Manual (Page 19)

19
8. Behind car seat, reassemble straps onto adjuster
bar exactly as shown
 , 
.
9. Inspect the harness straps from the front and
back of the car seat to be sure the straps are
inserted at the same level and that they are not
twisted. Twisted belts can create slack in the
harness straps and reduce the protection
provided by the car seat. Pull on harness to
make sure it is secure.
10. Return child to the seat. Make sure straps
are flat and tight against child’s shoulders.
Tighten harness so that you can slip only
one finger between harness strap and child’s
shoulder. Tighten harness by pulling on loose
webbing behind seat
‘
.
 
‘