GPX PF708 - Manual (Page 13)

Control Definitions
1 TFT Display
The TFT Display displays the unit’s menus and photos.
2 Infrared Receiver
The Infrared Receiver receives signals from the remote control.
3 DC Input
Connect the DC Input to power the unit.
4 Left/Right Buttons
Use the Left/Right Buttons to navigate the unit’s menus.
5 Menu/AL Off Button
Press the Menu Button to go back to the Main Menu. Press the AL Off Button to
turn the alarm off after it sounds.
6 Power/Snooze Button
Press the Power Button to turn the unit off and on. Press the Snooze Button to
delay the alarm for  minutes after it sounds.
7 SD/XD/MS/MMC Card Slot
Insert a compatible memory card into the SD/XD/MS/MMC Card Slot to play
photos, videos and audio files from the memory card. You can also transfer photos
from a memory expansion card to the photo frame’s internal memory by selecting
the Copy option in the main menu.
8 USB Port
Connect a USB Mass Storage Device to play photos, videos and audio files from
the digital storage device.
9 Headphone Output
Plug headphones into the Headphone Output to listen to audio through the head-
phones.
10 Easel
Adjust and use the Easel to place the unit in landscape or portrait orientation.
11 Volume Buttons
Press the Volume Buttons to adjust the volume of the unit, or to navigate the unit’s
menus.
12 Enter/Mode Button
Press the Enter/Mode Button to make selections in the unit’s menus, or to switch
between the clock and calendar when in clock or calendar mode.
1
10
1
11