GE KTC-117V3 - Manual (Page 7)

KTC-117/217/247 User Manual Programming the DIP Switch
1041075C / November 2003 7
3 P ROGRAMMING THE DIP S WITCH
To program the DIP switch (Figure 2), refer to Figure 3 or Figure 4
depending on your camera model.
Backlight compensation off/on
Flickerless off/on
Normal view / mirror view (flips picture left to right)
Normal / E Zoom
Figure 3. DIP switch for KTC-117 cameras
Backlight compensation off / on
Auto-tracking white balance / fixed white balance
Normal view / mirror view (flips picture left to right)
Normal / E Zoom
Figure 4. DIP switch for KTC-217 and KTC-247 cameras
3.1 B ACKLIGHT C OMPENSATION (BLC OFF OR ON)
Backlight compensation controls iris gain and white balance
simultaneously. If you have objects in the foreground that appear
silhouetted in front of a brighter background, set backlight compensation
to ON. The foreground objects appear with greater definition.
Note: Compensation might be insufficient when the background is extremely bright.
3.2 F LICKER C ONTROL (FL OFF OR ON)
Note: This switch is not available for the KTC-217 or KTC-247 cameras
If you install the camera in an area with fluorescent lighting, the picture
on the camera monitor might flicker. To minimize the flicker effect, set
the FL switch to ON.