Global Machinery Company HT18V - Manual (Page 4)

Even when the tool is used as prescribed it is not possible
to eliminate all residual risk factors. The following hazards
may arise in connection with the tool’s construction and
design:
• Contact with the blade.
• Kickback.
• Blade fracture.
• Catapulting of blade pieces.
• Damage to eyes if effective safety glasses or shield are
not worn.
• Damage to ears if effective ear defenders are not worn.
• Always remove the battery from the tool before making
any adjustments or maintenance.
WARNING. When using power tools, basic safety
precautions should always be taken to reduce the risk of
fire, electric shock and personal injury. Also, please read
and heed the advice given in the additional important
safety instructions.
1. Keep the work area clean and tidy. Cluttered work areas
and benches invite accidents and injury.
2. Consider the environment in which you are working. Do
not use power tools in damp or wet locations. Keep the
work area well lit. Do not expose power tools to rain
and high humidity. Do not use power tools in the
presence of flammable liquids or gases.
3. Keep visitors away from the work area. All visitors and
onlookers, especially children and infirm persons should
be kept well away from where you are working. Do not
let others in the vicinity make contact with the tool.
4. Store tools safely. When not in use, tools should
be stored in a dry, high place or locked up out of
the reach.
5. Do not force the tool. The tool will do the job better
and safer working at the rate for which it was
designed.
6. Use the correct tool for the job. Do not force small
tools or attachments to do the job best handled by a
heavier duty tool. Never use a tool for a purpose other
than that for which it was intended.
7. Dress correctly. Do not wear loose clothing or jewelry.
They can be caught in moving parts. Rubber gloves and
non-slip footwear are recommended when working
outdoors. If you have long hair, wear a protective hair
covering.
8. Use safety accessories. Safety glasses and ear muffs
should always be worn.
9. Do not overreach. Keep your footing secure and
balanced at all times.
10. Look after your tools. Keep tools clean and sharp for
better and safer performance. Follow the instructions
regarding lubrication and accessory changes. Keep tool
handles dry, clean and free from oil and grease.
11. Disable idle tools. Remove the battery from the tool
before servicing and when the tool is not in use.
12. Avoid unintentional starting. Make sure that the
switches are in the OFF position before attaching the
battery.
13. Stay alert. Watch what you are doing. Use common
sense. Do not operate a power tool when you are
tired.
14. Check for damaged parts. Before using a tool, check
that there are no damaged parts. If a part is slightly
damaged, carefully determine it will operate properly
and perform its intended function. Check for
alignment of moving parts, binding of moving parts,
breakage of parts, proper mounting and any other
conditions that may affect the operation of the tool.
A guard or other part that is damaged should be
properly repaired or replaced by an authorised service
facility, unless otherwise indicated in this Instruction
Manual. Defective switches must be replaced by an
authorised service facility. Do not use a tool if the
switch does not turn the tool on and off correctly.
4