GN Netcom STRATUS ULTRA-G - Manual (Page 5)

3
Changing Ears
1. Hold the receiver assembly in your left hand with the microphone boom
perpendicular to the floor.
2. With your right hand, flip the ear capsule down (see Figure 4).
3. Rotate 180° clockwise if you are going from right ear to left ear,
counterclockwise if you are going from left ear to right ear.
Removal
1. Remove the ear cushion.
2. In the right ear wearing style with the speaker facing you, hold the
headset in your left hand between your thumb and index finger.
3. With your right thumb and index finger, firmly grasp the top of the ear
capsule at the saddle (see Figure 5).
4. Pull down and out with your right hand, releasing the C-ring from the
receiver housing.
Installation
1. Remove the headband.
2. With the speaker side of the receiver facing you hold the headset
in your left hand between your thumb and index finger.
3. With your right hand, hold the ear capsule so that the C-ring
opening is facing the receiver.
4. Push the C-ring onto the receiver housing until it springs into place
in the groove (see Figure 6).
Figure 6
Installing Ear Capsule
Figure 4
Changing Ears
Figure 5
Removing Ear Capsule