Gefen GTV-ETH-2COAX - Manual (Page 4)

1
Congratulations on your purchase of the GefenTV Ethernet Over Coax. Your
complete satisfaction is very important to us.
Gefen TV
Gefen TV is a unique product line catering to the growing needs for innovative
home theater solutions. We specialize in total integration for your home theater,
while also focusing on going above and beyond customer expectations to ensure
you get the most from your hardware. We invite you to explore our distinct
product line and hope you fi nd your solutions. Don’t see what you are looking for
here? Please call us so we can better assist you with your particular needs.
The Gefen Ethernet Over Coax
The Gefen TV Ethernet Over Coaxial Sender and Receiver units send RJ-45
Ethernet over RG-59 or RG-6 Coax cable at a distance of up to 300m/1000 feet.
Ideal for legacy installations where Coaxial cable is already permanently in place,
these devices breathe new life into remote network extensions where re-wiring is
not possible.
How It Works
Connect your existing Ethernet network cables to the Ethernet Over Coaxial
Sender unit, then plug in your Coaxial cable to the Coaxial jack on the Sender
unit. At the other end of your Coaxial cable run, attach the Ethernet Over Coax
Receiver unit and your network cables. Power-cycle your equipment. You will
now receive Ethernet network signals at the end of your cable run as if you had
cabled the run with Ethernet cables.
INTRODUCTION