Gold's Gym GGSY2921.0 - Manual (Page 7)

7
5. Slide the Base (4) into the Upright Base (6). Tip
the Upright Base onto its back. Attach the Base to
the Upright Base with the four M8 x 25mm Patch
Screws (25).
4. Orient the Upright Stabilizer (7) as shown. Attach
the Upright Stabilizer to the Upright Base (6) with
two M8 x 70mm Carriage Bolts (76) and two M8
Black Nylon Locknuts (71).
3. Attach the Left Arm (12) to the Upright Base (6)
with two M10 x 25mm Button Screws (83) and
two M10 Split Washers (70). Note: Make sure
that the grip tape is on top.
Attach the Right Arm (not shown) in the same
manner.
3
5
12
83
83
70
Grip
Tape
70
6
6
4
25
25
Tip
76 7
71
71
4
6