GE 25425 - Manual (Page 32)

2
Intercom Calls
One-Touch Intercom
NOTE: If the INTERCOM indicator is turned on (solid red), the intercom is in use. You must
wait until the indicator turns off before making an intercom call.
1. Press the INTERCOM/MEMORY LOG button (1-16) for the station you want to intercom
with. The SPEAKER turns on.
Alternately, you may press the INTERCOM button, then press the INTERCOM/MEMORY
LOG button (1-16) for the stations you want to intercom with. The speakerphone auto-
matically turns on.
NOTE: If you want to switch to the handset, pick it up and continue speaking. To switch to
the headset press the HEADSET button.
NOTE: The handset, headset, or speakerphone cannot be active when an intercom call is
initiated (the handset should be on the cradle and the speakerphone and headset turned
OFF.)
NOTE: To abort intercom call, press SPEAKER button.
2. To end the intercom call, hang up.
NOTE: If the receiving station does not answer within 45 seconds, the intercom call is
cancelled. You will hear an error tone and NO ANSWER shows in the display. NOTE: If the
intercom is in use. You will hear an error tone and ERROR INHIBITED shows in the display.
Answering an Intercom Call
When you receive an INTERCOM call, the INTERCOM indicator flashes red, and the display
shows the caller’s name and phone ID.
NOTE: If you want to answer with the speakerphone, press the INTERCOM or SPEAKER
button. If you want to answer by headset, press the HEADSET button (the headset must be
connected). To answer by handset, lift the handset.
NOTE: Press SPEAKER or lift the handset to automatically select a party. If you receive an
incoming call and intercom call at the same time the unit automatically selects the ringing
line.
Intercom Hold
1. Make an intercom call or answer an intercom call.
2. Press the HOLD button. The Intercom indicator flashes blue.
NOTE:
• When the intercom is on hold, you may not receive another intercom.
• If the other party terminates intercom, intercom hold is also released.
Intercom Calls