Extra charging cradle, Registration – GE 28118 User Manual

Page 47

Advertising
background image

47

NOTE: To ensure proper battery installation, the connector is keyed and

can be inserted only one way.

4. Insert the battery pack.
5. Close the battery compartment by pushing the door up until it snaps into place.

Extra Charging Cradle

1. Plug the AC power adaptor of the extra charging cradle into the electrical outlet.

NOTE: This power adaptor is intended to be correctly orientated in a

vertical or floor mount position.

. Place the handset in the extra charging cradle. The charge indicator turns on, verifying the

battery is charging.

3. Allow the phone to charge for 1 hours.

Registration

YOU MUST REGISTER THE HANDSET TO THE MAIN BASE BEFORE USE!
After the optional handset has charged for 1 hours on the extra charger,

HANDSET NEEDS

REGISTRATION shows in the display.
1. Press the menu ok/mute button.

HOLD BASE PAGE FOR 5 SECONDS, THEN PRESS

HANDSET MENU OK shows in the display. (Your handset should be held near the base

during registration process.)

. Press and hold the page button on the base unit until the in use indicator flashes. Press

the handset the menu ok/mute button.

REGISTERING shows in the display. HANDSET X

REGISTERED shows in the handset display, where X is the handset number. You may now

rename your handset. (Refer to Step 3 & 4 of Handset Name Section)

Advertising