Specifications – Gemini UMX-3 User Manual

Page 6

Advertising

P a g e 6

NOTE

NOTE:

Keep

track

where

you

position

Keep

track

where

you

position

Keep

track

where

you

position

Keep

track

where

you

position

Keep

track

where

you

position

the

input

assign

switches.

avoid

the

input

assign

switches.

avoid

the

input

assign

switches.

avoid

the

input

assign

switches.

avoid

the

input

assign

switches.

avoid

confusion,

move

the

switch

position

confusion,

move

the

switch

position

confusion,

move

the

switch

position

confusion,

move

the

switch

position

confusion,

move

the

switch

position

near

the

corresponding

printing

the

near

the

corresponding

printing

the

near

the

corresponding

printing

the

near

the

corresponding

printing

the

near

the

corresponding

printing

the

faceplate.

. CHANNEL SLIDE CURVE SWITCHES: Use the 3 position CHANNEL

CHANNEL

SLIDE CURVE (28)

SLIDE CURVE (28) switches to adjust the kind of curve the channel

slides have. Move the selected channel slide curve switch to the 6 (top)

position to make the increase in level gradual and even. Move the

channel slide curve switch to the 20 (center) position to make the

increase in level less gradual as you move channel slide up. Move the

channel slide curve switch to the 30 (bottom) position to make the

increase in level even less gradual, especially at the top of the slide.

. CROSSFADER SECTION: The CROSSFADER (34)

CROSSFADER (34)

CROSSFADER (34) allows the mixing

of one source into another. The left side of the CROSSFADER (34)

CROSSFADER (34)

CROSSFADER (34) is

CHANNEL 1 and the right side is CHANNEL 2. The CROSSFADER

CROSSFADER

CURVE (22)

CURVE (22) control allows you to adjust the kind of curve the

crossfader has. Move the CROSSFADER CURVE (22)

CROSSFADER CURVE (22)

CROSSFADER CURVE (22) control to the

right to make the curve steep and cutting (perfect for scratching). Move

the CROSSFADER CURVE (22)

CROSSFADER CURVE (22)

CROSSFADER CURVE (22) control to the left to make the curve

gradual and gentle. The CROSSFADER REVERSE SWITCH (19)

CROSSFADER REVERSE SWITCH (19)

allows you to reverse the crossfader so that CHANNEL 2 is controlled

by the left side of the crossfader and CHANNEL 1 is controlled by the

right side of the crossfader. When REVERSE is activated the REVERSE

REVERSE

LED (33)

LED (33) will light.

NOTE: When the CROSSFADER REVERSE SWITCH (19) is activated

NOTE: When the CROSSFADER REVERSE SWITCH (19) is activated
(moved to the right), only the crossfader reverses. The Channel Slides and

(moved to the right), only the crossfader reverses. The Channel Slides and

(moved to the right), only the crossfader reverses. The Channel Slides and
Gain do not reverse.

Gain do not reverse.

. OUTPUT CONTROL SECTION: The level of the MASTER OUTPUT

MASTER OUTPUT

(4, 5)

(4, 5) is controlled by the MASTER (17)

MASTER (17)

MASTER (17) control. The ZONE (16)

ZONE (16)

control adjusts the level of the ZONE OUTPUT (6)

ZONE OUTPUT (6)

ZONE OUTPUT (6).

HINT: The zone

output is used by some DJs to run monitor speakers in their DJ booth.

You can also use it as a second ZONE or AMP output.

NOTE: The RECORD OUT (7) has no level control. The level is set by the

NOTE: The RECORD OUT (7) has no level control. The level is set by the
channel slides and the gain controls of the selected channel.

channel slides and the gain controls of the selected channel.

. MIC CONTROL: The MIC (15)

MIC (15)

MIC (15) level controls the level of the MIC.

. CUE SECTION: By connecting a set of headphonesto the PHONES (36)

PHONES (36)

jack, you can monitor the program output, each channel individually

or both channels together. The CUE ASSIGN (20)

CUE ASSIGN (20)

CUE ASSIGN (20) allows you to select

what to monitor and has 3 positions. Move the CUE ASSIGN (20)

CUE ASSIGN (20)

CUE ASSIGN (20) to

the left to monitor CHANNEL 1 and CHANNEL 2 in stereo. Move the

CUE ASSIGN (20)

CUE ASSIGN (20) to the center position to monitor the program

(PGM) output. Move the CUE ASSIGN (20)

CUE ASSIGN (20)

CUE ASSIGN (20) to the right to split the

signals from each channel so that CHANNEL 1 will be heard in one

earphone and CHANNEL 2 will be heard in the other earphone. While

the CUE ASSIGN (20)

CUE ASSIGN (20)

CUE ASSIGN (20) is in the left or right positions (the CHANNEL 1

and CHANNEL 2 combinations), move the CUE FADER (27)

CUE FADER (27)

CUE FADER (27) to the left

to isolate CHANNEL 1 and to the right to isolate CHANNEL 2. Move

the CUE FADER (27)

CUE FADER (27)

CUE FADER (27) to the center to listen to both channels together

(split or in stereo).

10. DISPLAY: The peak hold, dual function DISPLAY (31)

DISPLAY (31)

DISPLAY (31) indicates either

the MASTER

MASTER

MASTER output left and right levels or the channel 1 and channel

2 levels. You can choose the option you want by pressing the DISPLAY

DISPLAY

(25)

(25) button.

NOTE: When the DISPLAY (31) is in the channel 1/channel 2 display

NOTE: When the DISPLAY (31) is in the channel 1/channel 2 display
mode, by adjusting the individual channel gain, you can increase or

mode, by adjusting the individual channel gain, you can increase or

mode, by adjusting the individual channel gain, you can increase or
decrease the signal to match the other channel’s signal. The channel slides

decrease the signal to match the other channel’s signal. The channel slides

decrease the signal to match the other channel’s signal. The channel slides
and crossfader have no effect on the display readings.

and crossfader have no effect on the display readings.

Specifications

INPUTS:

Mic......................................................................1.5mV

2Kohm balanced

Phono.....................................................................................3mV

47Kohm

Line....................................................................................150

27Kohm

OUTPUTS:

Master (balanced)...........................................................0

dB 2 V 800 Ohm

Max.............................40 V Peak to Peak

Master/Zone (unbalanced)................................................0 dB 1V 400ohm

Max..............................20V Peak to Peak

Rec...........................................................................................225mV

5Kohm

GENERAL:

Gain.............................................................................................0

-20dB

Frequency Response.................................................20Hz - 20KHz +/- 2dB

Distortion............................................................................................0.08%

S/N

Ratio.........................................................................better

than

80dB

Headphone

Impedance.....................................................................16ohm

Power Source...............................................................115V/18V AC 0.75A

230V/18V AC 0.75A

Dimensions............................10”w x 14”h x 4.33”d (254 x 355 x 110 mm)

Weight.....................................................................................6.5

lbs

kg)

Advertising