GBC 930-115 - Manual (Page 8)

Page 1-4 © 2004 General Binding Corporation
Operations Manual Polaris II
– The safety label below means that you could be seriously
injured if you come in contact with the moving chain and
sprockets of the drive system.
This label is located near all drive sprockets on the machine.
Sharp knife
– The safety label below means that you could cut yourself
if you are not careful.
This label is located on the rear panel in the center of the
laminator just above the Electrical hazard safety label and
below the rear slitter.
Refer to Figure 1.3.1 Safety label placement for
illustration.