GIGABYTE GP-S6500 - Manual (Page 3)

3
GP-S6500
Connecting the speak er to the woofer module
Plug the color-coded RCA cable hard-wired to the back of the left satellite into the matching
jack marked LEFT on the back of the right satellite.
Do not insert the speaker system’s power plug into a wall outlet until all
connections are made. Also, turn off audio source.
Connecting the power cord
1. After all other connections are made, plug the other end of the power adapter into the
AC wall outlet. The speaker system is now ready to operate.
2. Turn on the audio source.
3. Access the controls by pressing on the power switch located on the right satellite.
To avoid hearing a popping sound when you turn on your GP-S6500
speaker system, always turn on your audio source first.
Controlling the system
To adjust the sound level using your speaker system controls:
For Volume - rotate the Volume control clockwise to increase or counter-clockwise to
decrease the volume.
For Bass - rotate the Bass compensation clockwise to increase or counter-clockwise
to decrease the bass.